Categories
- Build Features (8)
- Building the Hulls (16)
- Hull Frames (6)
- Sheeting the Hull (7)
- Construction Facilities (13)
- Dinghy (3)
- Internal Fitout (21)
- Joining the Hulls (7)
- Launch (1)
- People (4)
- Injuries (2)
- Preparations (10)
- Site Housekeeping (2)
- Systems (11)
- Electrical (4)
- Motors (3)
- Paint (1)
- Plumbing (1)
- Rigging (2)
- Travels (1)
- Uncategorized (9)
Recent Comments
- Troy bell on Timeline
- Bernie on Quick View Start to Finish
- Daryl Reid on Port Outboard Pod
- +femme 7 Jim on Fishing the Wooli River
- SeeBeeZee on Fishing the Wooli River
-
Recent Posts
Archives
- February 2016
- January 2016
- October 2015
- September 2015
- August 2015
- June 2015
- May 2015
- December 2014
- October 2014
- September 2014
- July 2014
- June 2014
- May 2014
- March 2014
- October 2013
- August 2013
- May 2013
- April 2013
- March 2013
- February 2013
- January 2013
- December 2012
- November 2012
- September 2012
- August 2012
- July 2012
- June 2012
- May 2012
- April 2012
- March 2012
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- May 2011
Blogroll
- DIY-Yacht Forum used by many Easy cat builders
- Easy Catamarans, web site of Peter Snell, the designer of the Easy's
- Outback Dreamer Web site from another Chris, also an Easy Sarah builder
Monthly Archives: March 2014
2014 Autumn Update – Port Hull Aft Locker
The void at the aft end of the port hull has finally been closed in. For a long time, we were considering building in a live bait tank. In the end, we took the easy way out and simply closed … Continue reading
Posted in Lockers
Leave a comment
2014 Autumn Update – Visitor’s Cabin
This is the second sleeping cabin on our boat. While it is slightly smaller than the main cabin (so as to provide storage for the water tanks), the bed is queen sized, and the cabin has an attached head that … Continue reading
Posted in Cabins, Internal Fitout
Leave a comment
2014 Autumn Update – Main Cabin
The main cabin is virtual complete. The cabin has been painted out with the top coat paint, and the deck glued on. All that remains is for the hatch to be fitted to the deck, and then the three temporary … Continue reading
Posted in Cabins, Internal Fitout
Leave a comment
2014 Autumn Update – Galley
Now that the gas installation is complete, the galley construction can be finished. We have just completed a shelf behind the sink. The coving and fairing is complete, and it is all ready to finish the painting. Painting out the … Continue reading
Posted in Galley, Internal Fitout
Leave a comment